SSC CGL Computer Fundamentals Questions 2026 (CPU, I/O Devices, Number System, Generations GK MCQ, कंप्यूटर फंडामेंटल्स) — Free Chapter Wise Test in Hindi & English

Who gave the stored-program concept, which register holds the address of the next instruction, what is (101101)₂ in decimal — SSC asks Computer Fundamentals as short one-line questions, and the four options are always four close cousins that look equally right. Practise 75 questions in 3 tests covering history and generations of computers, types of computers, CPU, registers, buses, ports, input and output devices, printers, number systems, computer codes and logic gates, written for the Computer Knowledge module of SSC CGL and CHSL Tier II. Every test is in English and Hindi, and every question has a 6–7 point bullet solution.

3 Tests 75 Questions 25 Questions per Test English & हिंदी

Computer Fundamentals Tests — Pick a Test and Start

Tap below to see all the tests. They run through the chapter in order — Test 1 covers introduction, history, generations and types of computers; Test 2 covers CPU, registers, buses, ports and input/output devices; Test 3 covers number systems, computer codes and logic gates. Choose English or हिंदी on any test.

Computer Fundamentals All Chapter Tests Checking… View tests

Set at real SSC CGL and CHSL Tier II level. Each test mixes the ways SSC asks computer questions — direct one-line questions, statement questions, match the following and assertion–reason — and no fact is asked twice across the chapter.

Loading tests…

Computer Fundamentals is the base chapter of the Computer Knowledge module. SSC asks who invented what and when (Babbage, Hollerith, von Neumann, ENIAC, UNIVAC), which part of the computer does a job (ALU, control unit, program counter, MAR, address bus), which device is input and which is output (OMR, MICR, plotter, light pen) and short conversions between binary, octal, decimal and hexadecimal. Every one of these is a fixed fact or a ten-second calculation.

Marks are lost in three places. The first is generations and their technology: vacuum tubes, transistors, ICs, VLSI microprocessors and AI get swapped in the options. The second is registers and buses: program counter vs instruction register, MAR vs MDR, and how address-bus width decides memory size. The third is number conversions and gates: one wrong carry in a binary sum, or mixing NAND with NOR, costs the mark. The tests here are built around exactly these three.

How Many Computer Fundamentals Questions Are Asked in SSC CGL?

Computer Knowledge is Section III, Module I of SSC CGL Tier II Paper I: 20 questions for 60 marks in 15 minutes, with 1 mark deducted for each wrong answer. It is qualifying — the marks do not add to your rank, but you must clear it. Computer Fundamentals is one of its seven chapters, and CHSL Tier II has a similar 15-question computer module. The topics below are the ones SSC returns to most often, roughly in order.

TopicHow oftenWhat is usually asked
Generations, history and inventorsVery frequentENIAC, UNIVAC, Babbage, Hollerith, von Neumann, technology of each generation
CPU, registers and busesVery frequentALU vs CU, program counter, MAR/MDR, address bus width, RISC vs CISC
Input and output devicesFrequentOMR, OCR, MICR, barcode and QR readers, printers, plotters, monitors
Number system conversionsFrequentBinary ↔ decimal, octal, hexadecimal; 1’s and 2’s complement
Computer codesRegularASCII, EBCDIC, Unicode, BCD, Gray and Excess-3 codes
Logic gates and Boolean algebraRegularUniversal gates, truth tables, De Morgan’s laws, half and full adder

Memory and storage devices have a chapter of their own; this chapter keeps to the computer itself, its devices and its number codes.

What Each Computer Fundamentals Test Covers

The 75 questions run through the chapter in syllabus order, 25 to a test.

TestTopics
Test 1Origin of the word computer, Data, program and liveware, Embedded computers, Famous titles in computing, GIGO, IPOS cycle, Versatility, Time units for speed, Limitations of computers, Abacus, Leibniz and the Stepped Reckoner, Years of early calculating machines, Analytical Engine, Herman Hollerith, ENIAC, Stored-program concept, UNIVAC I, Computing firsts in India, Generations and technology, Languages of computer generations, Analog computers, Hybrid computers, Mainframe computers, Supercomputer speed units, Applications: CAD
Test 2Control Unit, CPU registers, Memory Address Register, Von Neumann bottleneck, RISC vs CISC, Intel 4004 microprocessor, Opcode and operand, POST, System bus, Address bus width, Computer ports, USB, SMPS, QWERTY keyboard, Keyboard keys, Mouse, Trackball, Direct data entry devices, MICR, QR code, CRT monitor, E-ink display, Screen resolution, Printers, Plotter
Test 3Valid digits in octal, Binary to decimal conversion, Decimal fraction to binary, Bits per digit and MSB, Octal to decimal conversion, Conversions to decimal, Hexadecimal to binary conversion, Binary addition, 2's complement, Why 2's complement is used, Range of 8-bit signed numbers, BCD code, ASCII, EBCDIC and Excess-3, Binary to Gray code, Father of Boolean algebra, Rows in a truth table, Output rules of NAND, NOR, XOR, XNOR, Universal gates, Minimum NAND gates for OR, NAND as universal gate, Boolean laws, De Morgan's theorem, Half adder and full adder, Flip-flop as sequential circuit, Multiplexer as data selector

The three traps that cost the most marks

  • Generation vs technology. First generation – vacuum tubes; second – transistors; third – integrated circuits; fourth – VLSI microprocessors; fifth – AI. SSC gives the technology and offers the neighbouring generations as options.
  • Register roles. The program counter holds the address of the next instruction; the instruction register holds the instruction being executed; MAR holds an address and MDR the data. These four are swapped in almost every register question.
  • Conversions under time pressure. Write the place values (… 16, 8, 4, 2, 1) before you convert, group binary in threes for octal and fours for hex, and check the answer by converting back.

Solved Examples — SSC CGL Computer Fundamentals

Q1. The word 'computer' is derived from the Latin word 'computare'. What does 'computare' mean?
(a) To store
(b) To calculate
(c) To control
(d) To communicate
'Computare' is a Latin word meaning 'to calculate'. The English word 'computer' comes from this Latin root. Early computers were built only to perform calculations. A computer is an electronic machine that accepts input, processes it, stores it and gives output. Answer: (b)
Q2. Consider the following statements about basic computer terms:
1. Data means raw, unorganised facts and figures that have no meaning on their own.
2. A program is a set of instructions written in order to do a task.
3. Liveware refers to software that is permanently stored in a ROM chip.
Which of the statements given above is/are correct?
(a) 1 and 2 only
(b) 2 and 3 only
(c) 1 and 3 only
(d) 1, 2 and 3
Statements 1 and 2 are correct, so the answer is 1 and 2 only. Data is raw facts, such as marks 45, 78, 62 written without context. Information is data that has been processed and organised so that it has meaning. A program is an ordered set of instructions, such as a salary calculation program. Answer: (a)
Q3. Read the Assertion (A) and Reason (R) carefully.
Assertion (A): If wrong marks are typed into a computer, the total it shows will also be wrong.
Reason (R): A computer has no thinking power of its own and cannot judge or correct the input given to it.
(a) Both A and R are true, and R is the correct explanation of A
(b) Both A and R are true, but R is not the correct explanation of A
(c) A is true, but R is false
(d) A is false, but R is true
Both A and R are true, and R correctly explains A. This principle is called GIGO, which stands for Garbage In, Garbage Out. A computer only follows instructions and processes whatever data is given. It processes wrong data just as faithfully as correct data. Answer: (a)
Q4. कौन-सा डिजिटल परिपथ कई इनपुट लाइनों में से एक को चुनकर एक ही आउटपुट लाइन पर भेजता है, और इसलिए इसे डेटा सेलेक्टर भी कहा जाता है?
(a) डिकोडर
(b) एनकोडर
(c) डीमल्टीप्लेक्सर
(d) मल्टीप्लेक्सर
मल्टीप्लेक्सर (MUX) को डेटा सेलेक्टर कहा जाता है। यह सेलेक्ट लाइनों की मदद से कई इनपुट में से एक चुनकर एक ही आउटपुट पर भेजता है। डीमल्टीप्लेक्सर (DEMUX) इसका उलटा करता है: एक इनपुट को कई आउटपुट में से किसी एक पर भेजता है। एनकोडर 2ⁿ इनपुट लाइनों को n-बिट कोड में बदलता है, जैसे की-प्रेस को बाइनरी में। उत्तर: (d)

How the Computer Fundamentals Tests Work

  • 25 questions per test, with a full question palette — answered, skipped, marked for review, not visited.
  • 3 tests, 75 questions, in syllabus order — history and generations of computers, types of computers, CPU, registers, buses, ports, input and output devices, printers, number systems, computer codes and logic gates, with no fact repeated across the chapter.
  • All SSC question types — direct questions, statement questions, match the following and assertion–reason.
  • Optional 15-minute timer — the same 15 minutes the real Computer Knowledge module gives you for 20 questions.
  • Marking: +2 correct, −0.5 wrong, 0 unattempted.
  • 6–7 point bullet solutions open after you submit — the answer, the rule or full form behind it, related facts asked alongside it and what each wrong option actually refers to.
  • English and Hindi — every test and every solution is available in both; choose the language when you start.
  • Free with a TrickySSC account — sign in once with Google or your mobile number, and every test is open to you.

How to Prepare Computer Fundamentals for SSC CGL

  1. Make a one-page timeline. Abacus to AI — machine, inventor, year, generation. Most history questions are one line of that timeline.
  2. Draw the CPU once. ALU, CU, registers and the three buses on one diagram answer most architecture questions.
  3. Learn devices in pairs. OMR/OCR, MICR/barcode, impact/non-impact printers, CRT/LCD/LED — SSC builds its options from the pair.
  4. Practise five conversions a day. Binary, octal and hex conversions take seconds once your hand knows the place values.
  5. Read the solutions, not just the answer. Each solution carries six or seven related facts, which is how 75 questions cover the whole chapter.

All SSC CGL Chapter Wise Tests

Every chapter below has its own free chapter tests with full solutions.

Browse all 102 chapter tests — Maths (35) · Reasoning (28) · English (14) · GK (18) · Computer (7)
English Language
General Intelligence & Reasoning
Quantitative Aptitude (Maths)
General Awareness
Computer Knowledge

SSC CGL Computer Fundamentals — Frequently Asked Questions

How many Computer Fundamentals questions are asked in SSC CGL?
Computer Knowledge is a separate qualifying module in SSC CGL Tier II Paper I — 20 questions for 60 marks in 15 minutes, with 1 mark deducted for each wrong answer. Computer Fundamentals is one of its seven chapters, and CHSL Tier II has a similar 15-question computer module.
Which Computer Fundamentals topics are most important for SSC?
Generations of computers and their technology, CPU parts and registers, input and output devices, and number system conversions.
How many tests and questions are in this chapter?
Three tests of 25 questions each, 75 questions in all, in syllabus order — Test 1: introduction, history, generations and types of computers; Test 2: CPU, registers, buses, ports and input/output devices; Test 3: number systems, computer codes and logic gates.
Are the Computer Fundamentals tests available in Hindi?
Yes. Every test is available in both English and Hindi with the same questions and the same answer key, and you choose the language when you start the test.
What kinds of questions are in the tests?
The same four kinds SSC uses: direct one-line questions, statement questions, match the following (generation with technology, device with use, register with role) and assertion–reason. Most are direct questions, as in the real paper.
What do the solutions contain?
Six to seven short points for every question, in English and Hindi: the answer, the definition, full form or rule behind it, related facts that are asked alongside it, and what each wrong option actually refers to.
Is there a timer, and what is the marking scheme?
An optional 15-minute timer per test, and the marking of +2 for a correct answer, −0.5 for a wrong one and 0 for an unattempted question.
Are the Computer Fundamentals tests free?
Yes, every test is free. You need a free TrickySSC account to start one — sign in once with Google or your mobile number and every test is open to you.

More Free SSC CGL Practice